Search by product number
CLASS | No | PRODUCT | DETAIL | |
---|---|---|---|---|
Deck Hardware - Anchors |
AK18050 | Sea Anchor |
*Material: SUS304
*Do not use under conditions of constant rotation. *AK18050 is made to order. |
|
Fishing Implement - Fishing Net Fitting |
AK18153 | Purse Coupling |
Purse Coupling is a piece of rigging hardware designed for purse seiners. It is used for such as connecting between Auto Shackle and Purse Ring. A special kind of casting stainless steel is used for its body, and it has good strength and durability.
(It can not be used for the general operations of loading and unloading.) *Material: Special Stainless Steel Pin: SUS316 Sleeve: SUS316 Spring: SUS304 |
|
Block - Block |
AK1832
AK1833 AK1834 AK1835 |
Mini-Block with Swivel Eye |
*Materials: SUS304, Swivel: SCS13 (Equal to SUS304), Sheave: Nylon
*Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. *Actual sheave size of a size 40 is 42. |
|
Block - Block |
AK1822
AK1823 AK1824 AK1825 |
Mini-Block with Fixed Eye |
*Materials: SUS304, Sheave: Nylon
*Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. *Actual sheave size of a size 40 is 42. |
|
Fishing Implement - Fishing Net Fitting |
AK18302 | Snap Ring Type IL |
The difference of traditional "Snap Ring" :
"Snap Ring Type IL" has an interlock system. Therefore, without increasing of weight, the intensity of the product was increased. *Material: Special Stainless Steel Spring: SUS304 Lock Pin: HBsB Set Screw: SUS304 |
|
Fishing Implement - Fishing Net Fitting |
AK18225 | Purse Snap Shackle Type-2 PAT. | ||
Fishing Implement - Fishing Net Fitting |
AK18275 | Purse Ring |
The large-diameter roller and the large-diameter shaft enlarge the volume and surface area to prevent cracks and lengthen service life. The easy-to-disassemble shaft consists of a bolt and nut, and is double-locked with a rivet and set screw.
The roller edge part covers the body to prevent this part of the body and wire ropes (purse line) from rubbing against each other. Moreover, the roofed body makes it hard for nets and ropes to get caught. You can open the gate by inserting a round bar about 6mm of diameter to the hole of the lock pin end. You can keep the lock released by inserting the round bar, as shown on the right or by pulling the ring on the lock pin end and rotating the lock pin so that the ring is in the diagonal groove. *Material Main body: special stainless steel Roller: special steel Roller shaft (bolt, nut)/set screw/spring/double ring: SUS304 Lock pin: special stainless steel *This product is a fishing gear. Do not use it as a hanging hook for cargo handling. |
|
Rigging Hardware - Snap Hooks |
AK18315
AK18316 AK18317 |
Snap Hook |
Adopts an interlock system:
A large working load limit is achieved with its palm size An interlock system is employed for greater strength. The hook part firmly supports the load. Good operability is ensured by smooth movement of the gate and the wide opening. The rounded gate fits well with fingers and ropes. *Usage precautions Your fingers may be caught between the body and the gate when opening and closing the gate due to the structure of the product. Wear gloves and take care that your fingers do not get caught. *In using "Snap Hook size 1SH" with "Tough Hanging Roller", 1SH can pass through smoothly between the body and the sheave of Tough Hanging Roller. *Material: Special Stainless Steel Spring: SUS304 Lock Pin: Copper Alloy Set Screw: SUS304 |
|
Fishing Implement - Fishing Net Fitting |
AK18315
AK18316 AK18317 |
Snap Hook |
Adopts an interlock system:
A large working load limit is achieved with its palm size An interlock system is employed for greater strength. The hook part firmly supports the load. Good operability is ensured by smooth movement of the gate and the wide opening. The rounded gate fits well with fingers and ropes. *Usage precautions Your fingers may be caught between the body and the gate when opening and closing the gate due to the structure of the product. Wear gloves and take care that your fingers do not get caught. *In using "Snap Hook size 1SH" with "Tough Hanging Roller", 1SH can pass through smoothly between the body and the sheave of Tough Hanging Roller. *Material: Special Stainless Steel Spring: SUS304 Lock Pin: Copper Alloy Set Screw: SUS304 |
|
Rigging Hardware - Shackles |
AK18258
AK18259 |
Purse Shackle PAT. | ||
Fishing Implement - Fishing Net Fitting |
AK18231
AK18231B9 |
Auto Shackle Type 2 PAT. |
* Material: Special stainless steel
* This product is fishing gear. Do not use it as a hanging hook for cargo handling. * The gate may open unintentionally due to physical shock. Be sure to use a lock pin when sudden loads on connecting objects or the hardware are expected, or when the gate does not need to be opened for a long time. * The lock pin is sold separately. Please check the product number "AK18231B9" in the table below and request a quotation if you need. *If the gate is released while a load is applied, the main unit may be subjected to strong impact and the product may be damaged, or an accident may occur, such as a released load hitting the surrounding objects or people. |
|
Fishing Implement - Fishing Net Fitting |
AK18235
AK18236 |
Auto Shackle Type 3 |
Auto Shackle can be used for connecting purse seine net and purse ring.
The spring can be replaced with separately-sold new one when it does not function fully due to aging degradation. After taking top screw off from the body using a hex. wrench, the spring can be removed easily for replacement. *After replacing the spring, put threadlocking adhesive such as LOCTITE on the thread and screw in the body. Check the screw securely fastened on a regular basis.Replace the screw as well when replacing the spring. The gate can be easily released by inserting a spike. The large 12mm shaft promotes higher strength. And the hook is newly developed especially for this model. *Material: Special stainless steel *This product is a fishing gear. Do not use it as a hanging hook for cargo handling. *The gate may open unintentionally due to physical shock. *Spare springs and screws are available (sold separately).Please contact us. *If the gate is released while a load is applied, the main unit may be subjected to strong impact and the product may be damaged, or an accident may occur, such as a released load hitting the surrounding objects or people. |
|
Block - Block |
AK1840 | Mini-Block with Fixed Eye Type 2 |
*Materials: SUS304, Sheave: Nylon
*Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Fishing Implement - Fishing Net Fitting |
AK18280 | Purse Ring Type BL |
An interlocking system, which enables the hook part to be securely locked into the body, has been employed, to generate a high working load.
The shape of the roller edge part covers the body to prevent the purse line from rubbing against it. The roller can be removed and replaced. If the performance of the spring deteriorates due to certain factors such as aging, the built-in spring can be replaced by removing the screw. *Material: Body, Roller: Special stainless steel Roller shaft/spring/set screw: SUS304 Bush/lock pin: copper alloy *Since the roller is made of special stainless steel, so recommended using fiber rope. When using a steel wire rope with this product, there is a possibility the roller will be shaved by wire rope depending on the size of the workload, etc., |
|
Fishing Implement - Fishing Net Fitting |
AK18291
AK18293 |
Purse Ring Type O |
The roller edge part covers the body to prevent the body and purse line from rubbing against each other. Moreover, the roofed body prevents nets and ropes from getting caught.
*Material: Special stainless steel Roller shaft/set screw : SUS304 Bush: copper alloy *Since the roller is made of special stainless steel, so recommended using fiber rope. When using a steel wire rope with this product, there is a possibility the roller will be shaved by wire rope depending on the size of the workload, etc., *A worn roller can be replaced by using a hexagon wrench. Enabling easy replacement of parts reflects ASANOs policy to have our customers use our products for a long period of time. After reinstalling the roller, apply LOCTITE (No.243) or similar adhesive to the threaded part of the roller shaft (M18). In addition, apply ThreeBond MEC thread lock (No.2446) or similar adhesive to the hexagonal socket head set screw (M8/for preventing a rotate of roller shaft). |
|
Fishing Implement - Fishing Net Fitting |
AK18320 | Snap Hook Type B |
*Material: Special stainless steel
Spring : SUS304 Lock Pin : Copper alloy Set screw : SUS304 The main body adopts special stainless steel which is widely used for industrial parts such as sea water pump, and is excellent in wear resistance and corrosion resistance. The unique two-room structure makes it possible to smoothly connect the ropes and the net, and it corresponds to ropes and rings of up to 30 mm. The interlock system is adopted, the main body and the gate firmly mesh, realizing high usage load. In addition, the intermediate center bar enters the main body securely. This alleviates deformation that may occur during pulling and helps improve the working load limit. |
|
Fishing Implement - Others |
AK18055 | Fishing Net Needle |
The weight of the product itself can be used to tighten the knot.
*Material: special stainless steel |
|
Fishing Implement - Fishing Net Fitting |
AK18285 | Purse Ring Type BL Size 100 |
The gate can be unlocked and released by only pushing a button of the gate part.
An interlocking system, which enables the hook part to be securely locked into the body, has been employed, to generate a high working load. The shape of the roller edge part covers the body to prevent the purse line from rubbing against it. The roller can be removed and replaced. If the performance of the spring deteriorates due to certain factors such as aging, the built-in spring can be replaced by removing the screw. The material of roller is alloy steel, it has a hardness for using with metal wire rope. *Material: Body, Roller: Special stainless steel, Roller: alloy steel Roller shaft/spring/set screw: SUS304 Bush/lock pin: copper alloy |
|
Fishing Implement - Fishing Net Fitting |
AK18241
AK18231B9 |
Auto Shackle Type 2S |
This product is based on "Auto Shackle type 2", with improved the strength of body and safety working load, and added a shock-absorbing mechanism effecting when opening and closing the gate.
The gate can be opened and closed by tawing the attached a string to the main body, and can also be opened and closed using a spike. The gate can be locked using a lock pin (sold separately). * Material: Special stainless steel * This product is fishing gear. Do not use it as a hanging hook for cargo handling. * The gate may open unintentionally due to physical shock. Be sure to use a lock pin when sudden loads on connecting objects or the hardware are expected, or when the gate does not need to be opened for a long time. * The lock pin is sold separately. Please check the product number "AK18231B9" in the drawing above and request a quotation if you need it. *If the gate is released while a load is applied, the main unit may be subjected to strong impact and the product may be damaged, or an accident may occur, such as a released load hitting the surrounding objects or people. |
|
Fishing Implement - Fishing Net Fitting |
AK18372F | Pressed Flat Ring |
Pressed flat ring has a feature of flat sides, so it will make the rings be take less space on the ring hook.
*material : SUS304 |
|
Block - Block |
AK1854
AK1855 AK1856 AK1864 |
Heavy Duty Block Type-PB |
The tough "Heavyduty Block" is reborn to be tougher.
-Strength is improved by using a double arm for the top and a rib structure for the main body. Based on a detailed strength analysis, the design was changed to improve the strength compared to the current model while preventing an increase in weight. Furthermore, the rotational stability is improved by doubling the shield bearing. *Material: Special stainless steel, Sheave pin/swivel/swivel pin/toggle pin:SUS304, Grease nipple:SUS303 *The working load does not apply to the becket part. *The working load conforms to the working load of the bearings. *This product contains two steel bearings with rubber seals. |
|
Rigging Hardware - Snap Hooks |
AK18325 | AK Hook Type G |
*Material: Special stainless steel, Spring: SUS304
Hooks designed for connecting during gill net fishing. A 23 mm wide opening has been created in the gate section. Inserting or pulling out ropes or metal fittings is a smooth process. Various functions have been incorporated by taking intended purposes into account. "Ideal functions for gill net fishing" 1. Round shape of the main body The edge inside the main body is round and easy on ropes. In addition, the entire body is round, which prevents it from standing up on the reel and helps facilitate easy storage of the net when it is wound up. 2. Robust casted design As the product is designed to be cast with a high degree of freedom, the body thickness does not have to be uniform unlike wire materials, and sections to which a larger load is applied are made thicker to optimize product capacity. In addition, special stainless steel materials with superior abrasion and corrosion resistance are used. 3. Pin improves the working load limit A pin of the hinge with a larger 4.5 mm diameter compared with the conventional AK Hook product is used. "Safe interlock gate design" When the main body is engaged with the gate, a high working load limit is achieved. In addition, by taking the interference with the rope and fishing net into account, edges have been eliminated to as great a degree as possible to prevent entanglement. |
|
Fishing Implement - Fishing Net Fitting |
AK18325 | AK Hook Type G |
*Material: Special stainless steel, Spring: SUS304
Hooks designed for connecting during gill net fishing. A 23 mm wide opening has been created in the gate section. Inserting or pulling out ropes or metal fittings is a smooth process. Various functions have been incorporated by taking intended purposes into account. "Ideal functions for gill net fishing" 1. Round shape of the main body The edge inside the main body is round and easy on ropes. In addition, the entire body is round, which prevents it from standing up on the reel and helps facilitate easy storage of the net when it is wound up. 2. Robust casted design As the product is designed to be cast with a high degree of freedom, the body thickness does not have to be uniform unlike wire materials, and sections to which a larger load is applied are made thicker to optimize product capacity. In addition, special stainless steel materials with superior abrasion and corrosion resistance are used. 3. Pin improves the working load limit A pin of the hinge with a larger 4.5 mm diameter compared with the conventional AK Hook product is used. "Safe interlock gate design" When the main body is engaged with the gate, a high working load limit is achieved. In addition, by taking the interference with the rope and fishing net into account, edges have been eliminated to as great a degree as possible to prevent entanglement. |
|
Fishing Implement - Fishing Net Fitting |
AK18281 | Purse Ring Type BL -60 (SCM Roller) |
The gate can be unlocked and released by only pushing a button of the gate part.
An interlocking system, which enables the hook part to be securely locked into the body, has been employed, to generate a high working load. The shape of the roller edge part covers the body to prevent the purse line from rubbing against it. The roller can be removed and replaced. If the performance of the spring deteriorates due to certain factors such as aging, the built-in spring can be replaced by removing the screw. The material of roller is alloy steel, it has a hardness for using with metal wire rope. *Material: Body, Roller: Special stainless steel, Roller: alloy steel Roller shaft/spring/set screw: SUS304 Bush/lock pin: copper alloy |
|
Fishing Implement - Fishing Net Fitting |
AK18292
AK18294 |
Purse Ring Type-O (SCM Roller) |
The roller edge part covers the body to prevent the body and purse line from rubbing against each other. Moreover, the roofed body prevents nets and ropes from getting caught.
*Material: Body, Roller: Special stainless steel, Roller: alloy steel Roller shaft/set screw : SUS304 Bush: copper alloy *A worn roller can be replaced by using a hexagon wrench. Enabling easy replacement of parts reflects ASANOs policy to have our customers use our products for a long period of time. After reinstalling the roller, apply LOCTITE (No.243) or similar adhesive to the threaded part of the roller shaft (M18). In addition, apply ThreeBond MEC thread lock (No.2446) or similar adhesive to the hexagonal socket head set screw (M8/for preventing a rotate of roller shaft). |
|
Fishing Implement - Fishing Net Fitting |
AK18250 | Auto Shackle Type 4 |
Auto Shackle Type 4 is developed for Salmon Farming Industry.
This inherits the basic mechanism of the ASANO Auto Shackle series, which is "quick release" and "secure rigging". The gate can be released remotely by pulling a rope attached to the main body. Top ring is another noteworthy feature. In order to broaden the range of use, it is designed so that the rope can be pulled from multiple directions. |
|
Fishing Implement - Fishing Net Fitting |
AK18246 | Double Auto Shackle |
This product has a gate system of "Asano Auto Shackle" on both sides.
When connecting / releasing the ring and purse seine net, it can be easily connected quickly, also can be easily released by inserting tools such as spike into the hole of the main unit. The joint between the two gate parts is connected by a 16mm shaft, so it has sufficient strength and can move flexibly, it is reduced that applying too much large load to the product. * Material: Special Stainless Steel * This product is fishing gear. Do not use it as a hanging hook for cargo handling. * The gate may open unintentionally due to physical shock. * If the gate is released while a load is applied, the main unit may be subjected to strong impact and the product may be damaged, or an accident may occur, such as a released load hitting the surrounding objects or people. |
|
Fishing Implement - Fishing Net Fitting |
AK18165
AK18166 |
Coupling |
It is rigging hardware for purse seiner, used for such as connecting between Auto Shackle and Purse Ring.
(It can not be used for the general operations of loading and unloading.) When connecting two parts of the main body, the center pin can be secured firmly by hitting a spring pin with a hammer to insert into the hole of the collar. Also, you can remove the center pin by the spring pin punch. *Material Main Body: SUS316, Center Pin:SUS316, Collar: SUS316, Spring pin: SUS304 |
|
Fishing Implement - Fishing Net Fitting |
AK18299 | Purse Ring Type O-2 (SCM Roller) |
Install "Auto Shackle" function in the roller rings itself. You can connect and release fishing nets and purse lines with only this ring.
The material of the roller is alloy steel to be used with wire rope. *Material: Body, Roller: Special stainless steel, Roller: alloy steel Roller shaft/set screw : SUS304 Bush: copper alloy |
|
Fishing Implement - Fishing Net Fitting |
AK18298 | Purse Ring Type O-2 |
Install "Auto Shackle" function in the roller rings itself. You can connect and release fishing nets and purse lines with only this ring.
*Material: Special stainless steel Roller shaft/set screw : SUS304 Bush: copper alloy *Since the roller is made of special stainless steel, so recommended using fiber rope. When using a steel wire rope with this product, there is a possibility the roller will be shaved by wire rope depending on the size of the workload, etc., |
Copyright © ASANO METAL INDUSTRY CO., LTD.