Search by product number
CLASS | No | PRODUCT | DETAIL | |
---|---|---|---|---|
Rigging Hardware - Clamps |
AK16302
AK16300 |
AK Clamp Type 1 |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16302
AK16300 |
AK Clamp Type 1 |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Rigging Hardware - Clamps |
AK16315 | AK Clamp Type 2-N |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16315 | AK Clamp Type 2-N |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Wire Rope - Wire Clips |
AK16813
AK16814 AK16815 AK16816 |
Wire Rope Clip (Single)/(Double) |
*Material:SUS304
*Diameter of wire rope used may differ from the above mentioned sizes. *The gaps between clips and the length of wire rope at the end of the clip should be at least six times longer than the rope diameter. |
|
Fall Prevention - Wire Ropes - Wire Clips |
AK16813
AK16814 AK16815 AK16816 |
Wire Rope Clip (Single)/(Double) |
*Material:SUS304
*Diameter of wire rope used may differ from the above mentioned sizes. *The gaps between clips and the length of wire rope at the end of the clip should be at least six times longer than the rope diameter. |
|
Rigging Hardware - Pad Eyes |
AK16056
AK16057 |
Square Pad Eye |
*Material: SUS316
|
|
Rigging Hardware - Pad Eyes |
AK16074 | Oblong Pad Eye |
*Material: SUS304
|
|
Rigging Hardware - Others |
AK16020
AK16021 AK16022 AK16025 AK16026 AK16027 |
Angle Type U |
*Material: SUS304
*Bright polished is finished up to the extent of 400degrees. |
|
Deck Hardware - Others |
AK16500
AK16501 |
Coat Hook Type VS |
*Material:Special Stainless Steel
Raised head screw: SUS304 *This product is a hook for hanging. Do not use for other purposes. |
|
Block - Block |
AK1691 | Daruma Block type PB,Single Sheave(with Bearing) PAT. |
The groove of sheave is U-type.
We have also V-type that has 75mm and 100mm diameter. *Material: Special Stainless Steel, Sheave: SCS1(Equal to SUS401), Sheave pin/Swivel/Swivel pin/Toggle pin/Stopper pin: SUS304 *This product contains two steel bearings with rubber seal. *Working load limit does not apply to the becket. *The working load corresponds to the working load of the bearings. *For details see the product features an enlarged image on the left. -Prevention of toggle pin removal- -Prevention of nut loosening- |
|
Block - Block |
AK1680
AK1681 AK1682 |
AK Block Type PB (with Bearing) |
The design of the sheave mounting prevents the rope from easily snagging.
The bolt used at the swivel joint section is a size larger as compared with the former one and strengthened. *Materials: Special Stainless Steel Swivel/Swivel pinS/heave pin/nut: SUS304 *The working load corresponds to the working load of the bearings. *This product contains two steel bearings with rubber seal. *Nut in the center of the main body is left-hand thread. |
|
Block - Block |
AK1625
AK1626 AK1630 AK1631 AK1635 AK1636 AK1637 AK1638 AK1640 AK1641 |
AK Block Type S Single / Double Sheave |
*Materials: SCS14 (Equal to SUS316), Sheave pin/Swivel pin: SUS316
*Working load limit does not apply to the becket. *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. *AK1625(Size 20) and AK1626(Size 20) does not have a Beckett. |
|
Block - Block |
AK1690
AK1696 |
Daruma Block type PB,Single Sheave (with Bearing) V sheave type PAT. |
Equipped with sheaves of V-shape that has been developed for using wire ropes.
We have also U-type, 100mm diameter. *Material: Special Stainless Steel, Sheave: SCS1(Equal to SUS401), Sheave pin/Swivel/Swivel pin/Toggle pin/Stopper pin: SUS304 *This product contains two steel bearings with rubber seal. *Working load limit does not apply to the becket. *The working load corresponds to the working load of the bearings. *For details see the product features an enlarged image on the left. -Prevention of toggle pin removal- -Prevention of nut loosening- |
|
Rigging Hardware - Pad Eyes |
AK16351
AK16352 |
Hook Bolt R-Shape |
*Materials: SUS304
Anchor Plug: Steel,Plating |
|
Rigging Hardware - Clamps |
AK16306 | AK Clamp Type I-U |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16306 | AK Clamp Type I-U |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Rigging Hardware - Clamps |
AK16320 | AK Clamp Type SH-I |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16320 | AK Clamp Type SH-I |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Rigging Hardware - Clamps |
AK16321 | AK Clamp Type SH-II |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16321 | AK Clamp Type SH-II |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Rigging Hardware - Clamps |
AK16322 | AK Clamp Type SH-III |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
|
Fall Prevention - Clamps |
AK16322 | AK Clamp Type SH-III |
*Materials: Special stainless steel
Threaded bolt: SUS304 *The working load limit is a fixed value of the bolt, in accordance with the clamping torques indicated in the table. Caution: Do not use with load applied in the lateral direction. However, it can be used as within the range of lateral load (WLL) on the table. Do not use the product for the purpose related to human life such as hanging peoples ride or hanging on to it. |
Copyright © ASANO METAL INDUSTRY CO., LTD.