Search by product number
CLASS | No | PRODUCT | DETAIL | |
---|---|---|---|---|
Rigging Hardware - Carabiners |
AK1086
AK1087 AK1088 |
Pear Snap Hook with Safety Nut | *Material:SUS304 | |
Rigging Hardware - Snap Hooks |
AK1040
AK1041 AK1042 |
Snap Hook with Swivel Eye |
*Materials: SCS13 (equivalent to SUS304)
Pin & Spring: SUS304 *Do not use under conditions of constant rotation. |
|
Rigging Hardware - Snap Hooks |
AK1030
AK1031 AK1032 |
Double Snap Hook |
*Materials: SCS14 (equivalent to SUS316)
Pin & Spring: SUS304 |
|
Rigging Hardware - Snap Hooks |
AK1055
AK1056 |
Trigger Snap Hook with Swivel |
*Material: SCS13 (equivalent to SUS304)
*Do not use under conditions of constant rotation. |
|
Rigging Hardware - Snap Hooks |
AK1050
AK1051 AK1052 |
Comma-Shaped Spring Snap with Eye |
*Materials: SCS14 (equivalent to SUS316)
Spring: SUS304 |
|
Rigging Hardware - Carabiners |
AK1081
AK1082 AK1083 |
Pear Snap Hook |
*Material: SUS304
|
|
Rigging Hardware - Snap Hooks |
AK1009
AK1010 AK1011 AK1012 |
Snap Hook with Swivel Eye |
*Materials: SCS14 (equivalent to SUS316)
Spring: SUS304 *Do not use under conditions of constant rotation. |
|
Rigging Hardware - Snap Hooks |
AK1020
AK1021 AK1022 AK1023 |
Snap Hook with Fixed Eye |
*Materials: SCS14 (equivalent to SUS316)
Spring: SUS304 |
|
Rigging Hardware - Snap Hooks |
AK1090 | Spring Hook with Swivel Eye |
*Materials: SCS13 (equivalent to SUS304)
Pin & Spring: SUS304 *Do not use under conditions of constant rotation. |
|
Rigging Hardware - Carabiners |
AK1000
AK1001 AK1002 AK1003 AK1004 AK1015 |
AK Snap Hook (Stainless Steel) |
*Materials: SUS316
Spring: SUS304 |
|
Rigging Hardware - Carabiners |
AK1005
AK1006 AK1007 AK1008 AK1018 AK1019 |
AK Snap Hook with Eyelet |
*Materials: SUS316
Spring & Eyelet: SUS304 |
|
Rigging Hardware - Carabiners |
AK1025
AK1026 AK1027 |
AK Snap Hook with Nut |
*Materials: SUS316
Spring: SUS304 |
|
Block - Surface Mount Block |
AK10252
AK10253 |
Fixed Pulley Type TR Vertical Single Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 |
|
Block - Surface Mount Block |
AK10257
AK10258 |
Fixed Pulley Type TR-B Vertical Single Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 *TR-B contains bearings. |
|
Rigging Hardware - Snap Hooks |
AK1045
AK1046 AK1047 AK1048 |
Swivel Bolt Snap Hook |
*Materials: SCS14 (equivalent to SUS316)
Pin & Spring: SUS304 *Do not use under conditions of constant rotation. |
|
Rigging Hardware - Carabiners |
AK1035
AK1036 AK1037 |
AK Snap Hook with Nut & Eyelet |
*Materials: SUS316
Spring: SUS304 |
|
Rigging Hardware - Carabiners |
AK1070
AK1071 AK1072 AK1073 |
Spring Hook with Eye |
*Materials: SUS316
Spring: SUS304 |
|
Block - Surface Mount Block |
AK10272
AK10273 |
Fixed Pulley Type TR Vertical Double Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 |
|
Block - Surface Mount Block |
AK10277
AK10278 |
Fixed Pulley Type TR-B Vertical Double Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 *TR-B contains bearings. |
|
Block - Block |
AK10010
AK10011 AK10012 |
Tough Block type PB (with Bearing) |
*Materials: Special Stainless Steel, Sheave pin/neck bolt: SUS304
*Working load limit does not apply to the becket. *The working load corresponds to the working load of the bearings. *This product contains one steel bearings with rubber seal. *Nut in the center of the main body is left-hand thread. |
|
Block - Block |
AK10001
AK10002 AK10003 AK10004 |
AK Wani-Block Type P PAT. |
Repair and replacement of the sheave is simplified from other products by means of the combination of the special purpose attachment component, and a hexagon wrench.
Note:The hexagon wrench is not included in the price. *Materials: Special Stainless steel Sheave pin/Swivel/Swivel pin: SUS304 *Oil impregnated bush : bronze *The sheave of the AK10001 cannot be replaced. *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10141
AK10146 AK10142 AK10147 AK10143 AK10148 AK10144 AK10149 |
AK Block Type 3-A, Single / Double Sheave (with Eye Top) PAT. |
Considering the rope maximum diameter of each size, the space on the underside of the sheave and the diameter of the bucket hole were enlarged, and usability was improved.
*Materials:Special Stainless Steel, Sheave: SCS13 (equivalent to SUS304) Swivel/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. (The size 150 of this block is decided around from 1/6 -1/7 of breaking load.) |
|
Block - Block |
AK10161
AK10162 AK10163 AK10164 |
AK Snatch Block Type 3-A, Single Sheave (with Eye Top) PAT. |
The hook type snatch is adopted. It corresponds to the quick opening / closing operation of the snatch.
Safety latch is attached to hook. *Materials:Special Stainless Steel, Sheave: SCS13 (equivalent to SUS304) Swivel/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. (The size 150 of this block is decided around from 1/6 -1/7 of breaking load.) |
|
Block - Block |
AK10151
AK10156 AK10152 AK10157 |
AK Block Type 3-A, Single / Double Sheave (with Forged Hook Top) PAT. |
Considering the rope maximum diameter of each size, the space on the underside of the sheave and the diameter of the bucket hole were enlarged, and usability was improved.
*Materials:Special Stainless Steel, Sheave: SCS13 (equivalent to SUS304), Hook/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10171
AK10172 |
AK Snatch Block Type 3-A, Shingle Sheave (with Forged Hook Top) PAT. |
The hook type snatch is adopted. It corresponds to the quick opening / closing operation of the snatch.
You can choose this with a safety latch on the top hook. *Materials:Special Stainless Steel, Sheave: SCS13 (equivalent to SUS304), Hook/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10030
AK10031 AK10032 |
Sanma Block with Swivel Top (Stainless Sheave) |
*Materials: SUS304, Sheave: SCS13 (equivalent to SUS304)
*Oil impregnated bush : bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10035
AK10036 AK10037 |
Sanma Block with Swivel Top (Nylon Sheave) |
*Materials: SUS304, Sheave: Nylon
*Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10047
AK10048 |
Sanma Block with Shackle Top |
*Materials: SUS304, Sheave/Swivel: SCS13 (equivalent to SUS304)
*Oil impregnated bush : bronze *When using this product, tighten the shackle pin and then tighten the locking screw. *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10045 | Sanma Block with Jaw Top |
*Materials: SUS304, Sheave/Shackle: SCS13 (equivalent to SUS304)
*Oil impregnated bush : bronze *When using this product, securely tighten the pin. *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Surface Mount Block |
AK10040
AK10041 AK10042 |
Sanma Block without Top |
*Materials: SUS304, Sheave: SCS13 (equivalent to SUS304)
*Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Surface Mount Block |
AK10262 | Fixed Pulley Type TR Horizontal Single Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 |
|
Block - Surface Mount Block |
AK10267 | Fixed Pulley Type TR-B Horizontal Single Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 *TR-B contains bearings. |
|
Block - Surface Mount Block |
AK10282 | Fixed Pulley Type TR Horizontal Double Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 |
|
Block - Surface Mount Block |
AK10287 | Fixed Pulley Type TR-B Horizontal Double Sheave |
*Materials: SCS13 (equivalent to SUS304)
Sheave pin: SUS304 *TR-B contains bearings. |
|
Block - Block |
AK10300
AK10301 AK10302 |
AK Block Type PB (with Stainless steel Bearing) |
This product contains two stainless steel bearings with rubber seal.
The design of the sheave mounting prevents the rope from easily snagging. The bolt used at the swivel joint section is a size larger as compared with the former one and strengthened. *Materials: Special Stainless Steel Swivel/Swivel pin/Sheave pin/nut: SUS304 *The working load corresponds to the working load of the bearings. *Nut in the center of the main body is left-hand thread. |
|
Block - Block |
AK10065 | Tough Hanging Roller Type II (with Bearing) |
SWL:5t
Changing the horizontal width of the main body prevents even metal fittings from getting caught when hoisting. The sheave is also designed to be in the main body to prevent ropes from being caught. The wider space between the body and the sheave allows ropes and fittings to pass through. The bolt edge of the sheave pin is tightly fixed through crimping. Use a grease gun to lubricate. (* Use a grease gun with a nozzle size that is smaller than the inner diameter of the lubrication section.) * Material: Special stainless steel, Swivel/swivel pin/sheave pin: SUS304 Grease nipple: SUS303 * The working load conforms to the working load of the bearings. * This product contains two steel bearings with rubber seals. |
|
Block - Block |
AK10051
AK10052 |
Hanging Roller Type PB (with Stainless Bearing) |
"Product features"
Main body shape with visible sheave In addition to the unique shape, the sheave guard is slanted to reduce the risk of ropes being caught . "Sufficiently wide opening" The wider space between the body and the sheave allows ropes and fittings to pass through. "Improved sheave pin socket in main body" The design of the sheave pin socket was widened to improve the strength of the main body. "Bolt retainment through crimping" The bolt edge of the sheave pin is tightly fixed through crimping. "Sheave with bearings" Bearings in the sheave facilitate smooth rotation. *Material: Body : Special stainless steel, Swivel/swivel pin/sheave pin : SUS304 *The working load conforms to the working load of the bearings. *This product contains two stainless steel bearings with rubber seals. |
|
Block - Block |
AK10073 | AK Block Type PB II (with Bearing) |
Bearings in the sheave facilitate smooth rotation.
The bolt edge of the sheave pin is tightly fixed through crimping. Forged swivel for more safety. * Material: Special stainless steel, Swivel/swivel pin/sheave pin/becket bolt/becket collar: SUS304 * The working load conforms to the working load of the bearings. * This product contains two steel bearings with rubber seals. * The working load corresponds to the working load of the bearings. |
|
Block - Block |
AK10351
AK10352 |
Long Liner Wani-Block (with Stainless steel Bearing) |
Improved strength through the integrated structure of the sheave shaft and main body. The edges of the sheave are designed to fit into the main body to prevent ropes from getting tangled.
The protruding rib also contributes to increased strength. Lineup of V-groove and U-groove sheaves. Can be used in combination with our rigging hardware products (Swivel Jaw &Jaw, etc.). * Material: Special stainless steel, Sheave pin/sheave pin nut/M8 hex socket bolt: SUS304 * The working load conforms to the working load of the bearings. * This product contains two stainless steel bearings with rubber seals. * V-grooves and U-grooves are available for the shape of the sheave groove. |
|
Block - Block |
AK10083 | Wide Sheave Wani-Block (with Bearing) |
Enough width of the sheave allows ropes and knotting to pass through.
The bearings inside the sheave facilitate smooth rotation. The edges of the sheave are designed to fit into the main body to prevent ropes from getting tangled. Improved strength through the integrated structure of the sheave shaft and main body. The protruding rib also contributes to increased strength. * Material: Special stainless steel, Swivel/swivel pin/bolt: SUS304 * The working load conforms to the working load of the bearings. * This product contains two steel bearings with rubber seals. |
|
Block - Block |
AK10310
AK10311 AK10312 |
AK Block Type PB Double Sheave (with Stainless Bearing) |
A becket unique to this model is used. This has been designed for safety and is stronger than beckets used for existing models.
The design of the sheave pin socket has been widened to improve the strength of the main body. The bearings in the sheave facilitate smooth rotation. The bolt edges of the sheave and becket pins are firmly fixed through crimping to prevent them from loosening. *Material: Special stainless steel Swivel/swivel pin/sheave pin/becket pin/becket pin cover : SUS304 * The working load conforms to the working load of the bearings. * This product contains stainless bearings. |
|
Block - Block |
AK10362 | AK Block Type PB-S (Stainless Sheave with Stainless Bearing) |
AK Block type PB-S series is developed with assuming use for aquaculture net.
The main body produces excellent strength with a compact integral structure. In addition, the material is the special stainless steel with high corrosion resistance often used for industrial parts such as seawater pumps. Since the rims of the sheave are covered by the main body, a length of rope will not easily become caught between the main body and the sheave. There is no sharp edges and corners, and the pin/nut is flush the surface, and sunken (they are not sticking outside the surface). By combining with other metal fittings, the application for use is expanded. Also can be combined with a swivel. *Material: Special Stainless Steel *The working load corresponds to the working load of the bearings. *This product contains two stainless steel bearings with a rubber seal. |
|
Block - Block |
AK10372 | AK Block Type PB-S (Machined Nylon Sheave) |
AK Block type PB-S series is developed with assuming use for aquaculture net. Especially the type with a machined nylon sheave perform durability even when it is immersed in seawater.
The main body produces excellent strength with a compact integral structure. In addition, the material is the special stainless steel with high corrosion resistance often used for industrial parts such as seawater pumps. (excluding machined nylon sheaves.) Since the rims of the sheave are covered by the main body, a length of rope will not easily become caught between the main body and the sheave. There is no sharp edges and corners, and the pin/nut is flush the surface, and sunken (they are not sticking outside the surface). By combining with other metal fittings, the application for use is expanded. Also can be combined with a swivel. *Material: Special Stainless Steel, Sheave: MC801 Nylon |
|
Block - Block |
AK10181
AK10186 AK10182 AK10187 |
AK Block Type 3-A,Single / Double Sheave (Forged Hook Top With Safety latch) |
Considering the rope maximum diameter of each size, the space on the underside of the sheave and the diameter of the bucket hole were enlarged, and usability was improved.
Safety latch is attached to hook. *Materials:Special Stainless Steel,Sheave: SCS13 (equivalent to SUS304),Hook/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
|
Block - Block |
AK10191
AK10192 |
AK Snatch Block Type 3-A, Shingle Sheave (Forged Hook Top with Safety latch) |
The hook type snatch is adopted. It corresponds to the quick opening / closing operation of the snatch.
Safety latch is attached to hook. *Materials:Special Stainless Steel,Sheave: SCS13 (equivalent to SUS304),Hook/Side plate/Sheave pin/set screw with a hexagon hole: SUS304 *Oil impregnated bushing: bronze *Safety working load is set variously in each country. Our blocks safety working load is decided around from 1/8 to 1/10 of their breaking load. |
Copyright © ASANO METAL INDUSTRY CO., LTD.